SR 430, SR 450
English
22
As soon as the engine runs
N Pull the throttle trigger – the choke
knob (4) automatically returns to the
run position (e).
At very low outside temperatures
N Open throttle slightly – warm up the
engine for a short period.
Stopping the Engine
N Move the setting lever in the
direction of 0 – the engine stops –
the setting lever springs back to the
on position.
Other Hints on Starting
Engine stalls in cold start position c or
under acceleration
N Move the choke knob to o and
continue cranking until the engine
runs.
Engine does not start in warm start
position o
N Move the choke knob to c and
continue cranking until the engine
runs.
If the engine does not start
N Check that all settings are correct.
N Check that there is fuel in the tank
and refuel if necessary.
N Check that the spark plug boot is
properly connected.
N Repeat the starting procedure.
Fuel tank run until completely dry
N After refueling, press the manual
fuel pump bulb at least five times –
even if the bulb is filled with fuel.
N Set the choke knob according to
engine temperature.
N Now start the engine.
To Next Page
Loading...
