Application 4
Storage
If the truck is to be taken out of service for an
even longer period, contact your after-sales
service.
Taking back into service after
storage
If the pallet stacker has been out of service for
over six months, it must be inspected carefully
before it is taken back into service. The
inspection, similarly to the safety inspection,
should also include safety-related points on
the truck.
– Clean the stacker thoroughly.
– Oil all moving parts and j
oints.
– Check the condition and acid density of the
battery, charging it if required.
– Check the hydraulic oil for condensate and
renew the oil, if necessary.
– Perform the services a
s before initial
operation.
– Take the pallet stacker into operation.
– During the next commissioning, check in
particular:
• Traction drive, co
ntrol, steering
• Brake (service brake, parking brake)
• Lifting device
500
28043344 EN - 01/2018 93
To Next Page
Loading...
Need help?
General
