Need help?Do you have a question about the Still R70-50T and is the answer not in the manual?
General| Rated Load | 5000 kg |
|---|---|
| Drive System | Electric |
| Turning Radius | Approx. 2200 mm |
| Battery Voltage | 80 V |
| Travel Speed with / without load | Up to 16 km/h (loaded) / 18 km/h (unloaded) |
| Lift Speed with / without load | Approx. 0.5 m/s (loaded) / 0.6 m/s (unloaded) |
| Lowering Speed with / without load | Approx. 0.5 m/s (loaded) / 0.6 m/s (unloaded) |
| Load Capacity | 5000 kg |
| Travel Speed (loaded/unloaded) | Up to 16 km/h (loaded) / 18 km/h (unloaded) |
| Lift Speed (loaded/unloaded) | Approx. 0.5 m/s (loaded) / 0.6 m/s (unloaded) |
| Lowering Speed (loaded/unloaded) | Approx. 0.5 m/s (loaded) / 0.6 m/s (unloaded) |
| Tire Type | Solid Elastomer (SE) |
Defines danger, warning, caution, and note symbols used in the manual.
Outlines operator responsibilities for hazard assessment and safety measures.
Covers visual inspections, opening bonnet, checking fluids, and initial start-up procedures.
Provides a fault code table and explanations for various system messages.
Covers transport, lashing, towing, crane loading, jump starting, and emergency procedures.
Includes changing LPG cylinders and filling the LPG tank with safety precautions.
Details secure parking, switching off the engine, and measures for prolonged shutdown.
Lists maintenance intervals and required work based on operating hours.
Details tasks like cleaning, topping up fluids, changing filters, and servicing components.
Specific checks for the evaporator and pressure regulator.
Covers drive axle checks, brake adjustments, engine oil changes, and filter replacements.
Includes coolant change, draining, and topping up procedures.
Diagrams and lists for fuse assignments in the main holder and special equipment.
To Next Page
