Stinger Quad-Aer - Hydraulic Pump Issues; SeedBox Troubleshooting

To Next Page

To Previous Page

Whine or clicking from hydraulic pumps

1. Check hydraulic oil level.

2. Allow unit to reach operang temperature.

3. Inspect hydro pump fan shroud for debris.

4. Inspect hydro pump fan shroud and fan for clearance.

SeedBox Trouble Shoong

Seed ow stopped

1. Check Controller for “88” code signaling a jam in the

seed gate.

2. With the unit o, inspect the seed gate for damage or

debris.

3. Unbolt the actuator from the seed gate. Manually

move the seed gate le and right to ensure proper

operaon.

4. With the actuator unbolted, turn the seedbox on and

check the actuator for proper operaon.

Board is blank

1. Check both of the fuses by the engine.

2. Check the relay by the engine.

3. Check the connecon between the control board and

the wiring harness.

4. Check the connecon between the 12v lead on the

machine and the seedbox harness.