Operating your Fridge/Freezer
220-240V AC
• Consult a qualied electrician for these requirements.
• The Fridge/Freezer is equipped with a multi-voltage internal power supply with
priority circuit for connecting to an AC voltage power source of 100-240V.
• The power supply automatically switches the Fridge/Freezer to mains operation
when connected to 220-240V mains power, even if the 12V/24V DC power
cable is connected.
• The power input socket is tted with a 15A blade fuse for protection.
AC Power Cable
AC Connection
CAUTION
Do not touch cables, plugs or switches with wet hands or when your feet
are in contact with water! If you operate your Fridge/Freezer on board a boat
by means of a shore connection to a 220-240V AC power source, the power
connection must include an earth leakage RCD residual current device.
• Plug the 220-240V AC power cable into the AC POWER socket (as circled
above) at the rear of the Fridge/Freezer and then connect to a suitable
220-240V AC power source.
• Select the on-off power switch
button to turn the Fridge/Freezer ON.
• The display will automatically show the current internal cabinet temperature.
To Next Page
Loading...
