Need help?Do you have a question about the Stirling PRI40LP and is the answer not in the manual?
Covers voltage, connection, moisture protection, cable handling, and uninsulated cables.
Guides on placing the unit in a dry, safe location away from heat sources.
Explains temperature zones, usage for refrigeration/freezing, and operation on angles.
Lists components and tools for assembly, like washers, stands, and cables.
Details the process of mounting stands and attaching handles using screws and brackets.
Outlines the need for AC or DC voltage and specifies DC input for 12V/24V sources.
Explains automatic switch-off/on based on vehicle ignition and battery monitor.
Details how to connect the 12V/24V DC power cable to the unit and vehicle socket.
Details connecting the AC power cable to the unit and a suitable power source.
Explains how to set desired temperature using power, mode, and temperature control buttons.
Describes how the display shows temperature and how to switch between Celsius and Fahrenheit.
Explains the ECO and MAX modes for compressor speed and power consumption.
Provides advice on placement, cooling food before storing, and efficient usage.
Details connecting solar panels via a battery, not directly, and recommended wattage.
Advises on generator types, AC/DC connection safety, and battery charging.
Provides guidance on cleaning the fridge/freezer, what not to use, and handling stubborn dirt.
Advises not to fully close the lid when storing for long periods to prevent mould and odours.
Advises responsible disposal of the unit at the end of its working life.
Lists checks for power source, cable connections, fuse, and unit switch for startup issues.
Advises to increase temperature setting if the fridge contents are freezing unintentionally.
Lists common causes for poor cooling like food temperature, lid seal, and ventilation.
Explains normal refrigerant flow noise and checks for unit stability and vibrations.
Covers checks for voltage, sockets, fuses, and potential adaptor defects.
Addresses display problems, dirty sockets, or incorrect plug assembly in 12V/24V mode.
Details troubleshooting for error E1, low voltage, and potential internal faults causing cooling failure.
General| Category | Refrigerator |
|---|---|
| Model | PRI40LP |
| Type | Portable |
| Capacity | 40 liters |
| Voltage | 12/24V DC, 240V AC |
To Next Page
