STL STRIKER 2 - Page 6

6 SpeedTech Lights, Inc © 2019
STRIKER
®
2
DASH LIGHT
Windshield Visor Assembly and Mounting
The windshield visor contents include:
• (1) Visor
• (2) Visor end caps
• (6) Short screws
• (4) Long screws
1. Remove the stock end cap screws from
both ends of the Light Bar.
NOTE: Save these screws to revert back
to non-visor conguration.
2. Secure (2) visor end caps onto both ends
of the visor using (6) short screws.
3. Secure the visor assembly to the Light Bar using
(4) long screws included with the windshield visor.