Need help?Do you have a question about the Stollmann TA+P2I and is the answer not in the manual?
Describes the TA+P2I's capability to connect ISDN phones and ISDN PABX with analogue interfaces.
Lists the parts included in the TA+P2I package, such as the adapter, power supply, and cables.
Step-by-step guide for installing the TA+P2I with ISDN phones and a cable modem.
Instructions for connecting the TA+P2I to an ISDN PABX for integrated phone system use.
Explains the function and meaning of the LEDs on the TA+P2I front panel for status indication.
Details how to configure MSNs for routing incoming calls to specific ISDN phones on analogue lines.
Explains how to initiate outgoing calls, MSN usage, and call pause handling.
Describes how call waiting is signaled and handled on the ISDN phone.
Explains how to use the call hold and enquiry functions via ISDN phone sequences.
Details the procedure for initiating a three-party conference call using ISDN phone functions.
Describes activation and deactivation of call forwarding using prefix codes on analogue lines.
Covers other supplementary services like call transfer, controlled via DTMF tones.
Troubleshooting guide for issues preventing outgoing or incoming calls.
Addresses problems where the analogue line is connected but no dial tone is available.
Guide to resolving issues with receiving incoming calls, focusing on MSN settings.
Frequently asked questions about TA+P2I capabilities, data connections, and call waiting.
Lists dial codes for configuring MSNs, barring, date/time, and resetting parameters.
Details the plug type, signaling, and pin assignment for the TA+P2I's analogue interfaces.
Describes the ISDN interface, plug type, terminating resistors, and supported supplementary services.
General| Brand | Stollmann |
|---|---|
| Model | TA+P2I |
| Category | Telephone Accessories |
| Language | English |
To Next Page