EasyManua.ls Logo

Stone Bake Primo - Oven Maintenance; Oven Delivery and Assembly; Oven Clearances and Safety

Default Icon
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© The Stone Bake Oven Company 2011. All rights reserved. © The Stone Bake Oven Company 2011. All rights reserved.
1.2 Oven nish
Due to the oven’s hand casting process and the nature of the materials
used, natural variation between ovens is expected. We believe this adds
to the rustic and individual charm of your oven. Rough edges may be
smoothed gently with a coarse grit sandpaper.
1.3 Soot
After initial use, your oven may become blackened in parts, this is due to
soot accumulation. This is a normal expectation of any wood red oven.
1.4 Oven cracks/ chipping
Due to the expansion and contraction of the oven during operation, the
appearance of cracks, visible during and after operation is expected. This
is a normal expectation if any wood red oven. This WILL NOT affect the
longevity and effectiveness of your Stone Bake Oven.
Due to the nature of the casting material, the Primo Oven may get chipped
during transportation and maneuvering. This will not effect the functioning
or longevity of your oven, request a Patch Kit from the Stone Bake Oven
Company.
1.5 Reinforcement bres
Please be aware of the potential for ne metal bres to protrude from the
oven base or dome, take care and consideration when maneuvering or
using.
1.6 Oven maintenance
The Primo Oven boasts very little cleaning and maintenance. All spilled and
stuck on food can either be removed by the pizza peel (see Tools section
3.4), or will be burnt off by the heat achieved inside the oven. Simply empty
out the ashes before the next ring in a safe way (see How to dispose
of ashes safely 3.3). Seal or cover your oven with the Stone Bake Oven
Company Sealant and/or Cover to protect your oven from the elements.
2. Oven delivery and assembly
2.1 Oven clearances
It is essential that a clear space is maintained around the outside of the
external walls of the oven. Combustible and non-combustible materials must
be kept away from the oven during and after oven ring. We recommend at
least 1200mm above the oven and 900mm from all sides of the oven.
Beware of ying sparks. If the base framework is used for wood storage it is
recommended to cover the wood storage with a non-combustible material
to protect from ying sparks and heat. Failure to follow instructions may result
in re. If you choose to build-in your Primo Oven, as dened by the Stone
Bake Oven Company lesser oven clearances may apply. Contact the Stone
Bake Team for more information.
WARNING! HOT SURFACES
To ensure optimum safety please adhere to the
minimum oven clearances to reduce re risk.