- 15 -
2. HEALTH & SAFETY
Safety Precautions
• Keep feet clear of all drums.
• Keep work area free of bystanders.
• For foot protection, wear steel toe shoes or toe pads.
• Caution: Keep away from the machine’s articulation area when the
engine is running.
• Only start engine from operator’s seat.
• Before starting machine, make sure that there are no persons or
obstacles near or under machine.
PRACTICE SAFE MAINTENANCE
• Understand service procedure before doing work. Keep area clean
and dry.
• Never lubricate, service or adjust machine while it is moving. Keep
hands, feet, and clothing from power-driven parts. Disengage all
power and operate controls to relieve pressure. Lower equipment to
the ground. Stop the engine. Remove the key. Allow machine to
cool.
• Securely support any machine elements that must be raised for
service work.
• Keep all parts in good condition and properly installed. Fix damage
immediately. Replace worn or broken parts. Remove any buildup of
grease, oil, or debris.
• Disconnect battery ground cable (-) before making adjustments on
electrical systems or welding on machine.
PREPARE FOR EMERGENCIES
• Be prepared if a fire starts.
• Keep a first aid kit and fire extinguisher handy.
• Keep emergency numbers for doctors, ambulance service, hospital,
and fire department near your telephone.
To Next Page
Loading...
