EasyManua.ls Logo

Storex MediaZapper HD 2 - Safety Information; General Information; Safety Precautions; Electrical Power Supply

Storex MediaZapper HD 2
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MediaZapper HD 2 Page 16/20
SAFETY INFORMATION
This device was designed and manufactured to ensure your safety. The safety
mechanisms built into the product offer adequate protection if you observe the following
procedures for installing, using and repairs:
- Carefully read and follow the instructions below before handling and installing
your hardware.
- Keep these instructions on hand so you may refer to them later.
GENERAL INFORMATION
-
Do not shake the player at the risk of damaging the product.
- Use only parts and accessories (power adapter, etc.) recommended by the
manufacturer.
-
Do not move the appliance while it is operating.
SAFETY PRECAUTIONS
- To avoid the risk of fire or electrical shock, do not place the device near objects
filled with liquids.
- If a heavy object falls or liquid spills onto the device, unplug it immediately and
have it checked by qualified personnel before re-use.
- While operating, the housing unit gives off heat, therefore, place the product on a
flat and rigid surface and avoid covering or placing any item on top of it.
ELECTRICAL POWER SUPPLY
-
In the event of prolonged disuse of the product, or during a lightning storm,
unplug the unit from the wall outlet by grasping the plug itself, without pulling on
the cable.
- The power adapter provided is specific to the product. The use of another adapter
could damage the product or lead to accidents.
PROPER PLACEMENT OF THE PRODUCT
- Install the appliance far away from any equipment with a strong attraction such as
microwave ovens, large speakers and so forth.
- Place your product in a location with adequate ventilation and on a flat and rigid
surface to disperse the heat emitted by the device.