STORK TRONIC ST121-KD1KAR.112 - Parameter List: Buttons and Inputs (B-); Key and Input Function Assignment

Order number: 900323.001 V1.74 Page 6
© Störk-Tronic 2021 • www.stoerk-tronic.com • Subject to modifications.
Parameter list software .112
b-- Buttons and switching inputs (password-protected)
Para-
meter
Description of function Setting range Default
value
b1
Function of key T1 0: without function
1: controller on/standby
2: defrosting request
3: Acknowledge alarm
4: Relay function light 1, not active in standby
5: Relay function light 1, independent of standby
6: Relay function light 2, not active in standby
7: Relay function light 2, independent of standby
8: Relay function window heating, not active in standby
9: Relay function window heating, independent of standby
10: Relay function blade scraper, not active in standby
11: Relay function blade scraper, independent of standby
12: Relay function door frame heating, not active in standby
13: Relay function door frame heating, independent of standby
14: Relay function F, not active in standby
15: Relay function F, independent of Standby
16: Set1 / Set2 - changeover
17: Day / Night - changeover
18: “Superfrost” on/off
19: Evaporator fan permanently on
20: Control circuit 1 on/off
21: Control circuit 2 on/off
22: Set for setpoint Y1
23: display MIN
24: display MAX
25: display sensor F1
26: display sensor F2
27: display sensor F3
28: display sensor F4
29: display sensor F5
30: reset both MIN/MAX
31: reset MIN
32: reset MAX
33: set time
34: set date
35: like 22 + switch display
36: like 16 + remember state
37: like 5 + remember state
38: like 7 + remember state
2
b2
Function of key T2
see b1
3
b3
Function of key T3
see b1
0
b4
Function of key T4
see b1
0
b5
Function of key T5
see b1
0
b6
Function of key T6
see b1
1
b7
Function of key T7
see b1
0
b8
Function of key T8
see b1
0