Storz OR1 SmartScreen - Maintenance, Servicing, Repairs, and Disposal; Maintaining the Product; Maintenance; Repairing the Product

Maintenance, servicing, repairs, and disposal
Instructions for use • OR1 SmartScreen • PQJ219_EN_V1.0_04-2021_IFU_CE-MDR 16
6 Maintenance, servicing, repairs, and disposal
6.1 Maintaining the product
If they are not described in more detail here, maintenance activities may only be performed by
KARLSTORZ or by a company authorized by KARLSTORZ.
6.2 Maintenance
The following maintenance intervals are recommended:
Interval Activity To be performed by
annually Safety test KARLSTORZ service techni-
cians
6.3 Repairing the product
Repair work may only be performed by KARLSTORZ or by a company authorized by
KARLSTORZ. The interventions described in this instruction manual are exempt from this rule.
Please contact your local KARLSTORZ subsidiary or authorized dealer (see the list of
subsidiaries).
Contaminated devices may not be shipped. To prevent contact infections and airborne
infections, products must first be decontaminated. KARLSTORZ reserves the right to send
back contaminated products.
6.4 Disposing of the product
The product meets the requirements of the Directive on Waste Electrical and Electronic
Equipment (WEEE).
Within the scope of application of this directive, KARLSTORZSE&Co.KG is responsible for
the proper disposal of this product.
1. The product must be disposed of in accordance with the applicable national laws and
regulations at a suitable collection point for the reprocessing of electrical and electronic
equipment.
2. Contact KARLSTORZSE&Co.KG, a KARLSTORZ branch or an authorized dealer to
find out the address of the collection point in your area.