Storz OR1 SmartScreen - Normal Use; Intended Use; Indications; Contraindications

Normal use
Instructions for use • OR1 SmartScreen • PQJ219_EN_V1.0_04-2021_IFU_CE-MDR 5
2 Normal use
2.1 Intended use
The KARLSTORZ SMARTSCREEN is designed for use by qualified personnel in practices and
operating rooms. The SMARTSCREEN is used for controlling the allocated, compatible
KARLSTORZ medical devices (such as the KARLSTORZ AIDA® WD300) from within an
unsterile area and should be positioned under the compatible KARLSTORZ equipment.
The combination of the two medical devices enables a non-sterile user to view and
preoperatively use the connected medical device within the medical area. Data and images are
shown on the FULL HD display of the SMARTSCREEN and can be processed using the 10-
finger multi-touchscreen. For other important and fundamental information on safe use of the
medical device, the user must pay attention to the software description and the instructions for
use for the compatible KARLSTORZ equipment.
2.2 Indications
Display of video signals between signal sources and signal destinations in the case of medical
procedures. Control inputs for controlling connected devices.
2.3 Contraindications
None
2.4 Target user populations
The medical device may only be used by doctors and medical assistants with a relevant
specialist qualification.
2.5 Patient groups
There are no restrictions in terms of patient groups for this product.