Lisa LCD 6
4. Reboot the device once, to get configurations from the provisioning platform.
During startup, the device activation is executed. The Lisa device will receive code from the activation
server, enabling the capabilities on the device that correspond to the purchased edition. For more
information, please see Device activation.
3.3 Device activation
All Lisa devices are shipped with Basic edition capabilities. The Basic edition only supports streaming of
content in MP3 format. If you have purchased a device of a different edition, this will only be enabled after
the device has been activated.
Activation is done during startup. During activation, the Lisa device receives code from the activation
server, enabling the capabilities on the device that correspond to the purchased edition (e.g. Ultimate).
Please note that it is not possible to upgrade/downgrade to a different edition after the purchase is made.
The activation process for a Lisa device running up-to-date software is automatic and transparent to the
user. During startup, a non-activated Lisa device will connect to the activation server. For this to
succeed, internet connectivity is required, the device needs to be connected properly and correct
network settings have to be programmed.
All Lisa devices need to be connected at least once to the public internet for activation, before it can
be used in a private network.
4
Applications
The Lisa devices have been developed to be used for in-store audio a (also referred to as commercial
audio or background music) applications. For these applications, we have identified the following
operational setups:
Standalone
Streamit Device portal
Streamit Audio Distribution Platform
Your own platform
These variants are described in more detail below.
Standalone operation
You do not have to use the Lisa for playing from the internet. When you have a sufficiently large number
of audio files available, you can also make exclusive use of the card functionality. The supported format
for the audio files depends on the software edition of the Lisa. To make the Lisa play from the card, you
need to create playlists and copy them together with the audio files on a memory card. You can read the
details in Storing content on the card and Requirements for playlists.
To Next Page
