ESR-Auto Plus Operator’s Manual III
6 Menu Function 6 - Service Menu 35
6.1 Accessing Menu 37
6.2 Set Language 37
6.3 Set Date and Time Style Formats 38
6.4 Registering Test Rack 39
6.5 Set Tube Type 40
6.6 Set Calibration 40
6.7 Set Test Mode 41
6.8 Set Access Code 41
6.9 See Temperature 41
6.10 RAM Reset 42
7 Background of the ESR Test 43
7.1 The History 45
7.2 The Original 200mm System 45
7.3 The 100mm Vacuum System 45
7.4 BD Standard Scale vs. QuickMode Method 45
7.5 The ESR-Vacuum Tube 46
7.6 A Typical ESR Reaction 47
7.7 ESR Reference Ranges / Values 47
8 Performance & Technical Specications 49
8.1 Overview 51
8.2 Measuring Abnormal Samples 51
8.3 Fill Level 51
8.4 Temperature Compensation 52
8.5 ESR-Auto Plus Precision 52
8.6 Preventive Maintenance 52
8.7 Cleaning Instructions 52
8.8 Barcode Scanner 53
8.9 Data Output 53
8.10 Technical Specications, ESR-Auto Plus 54
8.11 Environmental Conditions 55
8.12 Transportation Environment 55
8.13 Technical Specications, ESR-657 Mixer 56
8.14 Disclaimer 56
9 Safety Precautions 57
9.1 User Precautions 59
9.2 Electrical Equipment 59
9.3 Disconnect Device 59
9.4 Sample Analysis 59
9.5 Application of Secondary Labels 59
9.6 Removal of ESR-Vacuum Tubes 60
9.7 Repackaging Instructions 60
9.8 Glossary of Safety Symbols 60
10 Troubleshooting 61
10.1 Error Codes 63
10.2 Status Codes 64
10.3 Troubleshooting Guide 65
11 Quick Reference Guide 67
11.1 Standby Screen 69
11.2 Sample Mixing 69
11.3 Run Test Rack 69
11.4 Register New Lot of QC 69
11.5 Run QC Sample 70
11.6 Run Patient Sample 70
11.7 Cancel Measurement 70
11.8 Predict Sample Result 70
11.9 Re-Register Test Rack 71
QC Maintenance Record 73
To Next Page
Loading...
