FRONT PANEL DESCRIPTION
7
Display
Rotary switch
Hold button
“ 10A” jack
“ COM “ jack
“ VOmA” jack
3 1/2 digit, 7 segment, 15mm high LCD.
This switch is used to select functions and desired ranges as well as to turn on/o the meter.
When this button is pushed, the display will keep the last reading and “• “ symbol will appear on the
LCD until pushing it again.
Plug in connector for red test lead for 10 A measurement.
Plug in connector for black (negative) test lead.
Plug in connector for red (positive) test lead for voltage, resistance and current (except 1 OA)
measurements.
1.
2.
3.
4.
5.
6.
SPECIFICATIONS
Accuracy is specied for a period of one year after calibration and at 18 to 28°C (64”F to 82’F) with
relative humidity to 80%.
GENERAL
Maximum voltage between
terminals and earth ground
CAT11600V
Fuse protection F 200mA/250V
Power 9V battery, NEDA 1640 or 6F22
Display LCD, 1999 counts, updates 2-3/ sec.
Measuring method Dual-slope integration AID converter
Overrange Indication Only gure “ 1 “ on the display
Polarity indication “- “ displayed for negative polarity
Operating Environment O to 40” C
Storage temperature - 10 “C toso·c
Low battery indication ” “ appears on the display
Size 138mm X 69mm X 31mm
Weight Approx.160g
To Next Page
Loading...
