1. Replace engine oil.
2. Disconnect the spark plug. Fill a spoon of fresh engine oil from the spark plug
mount hole into the cylinder. Rotate the engine to distribute engine oil evenly,
followed by fitting the spark plug to original position.
3. Pull the starting rope slowly until feel a slight anti-action, and then keep pulling so
as to align the arrow of the starting sleeve with the hole of the starter. At this time,
both the inlet and outlet valves are closed so to help prevent the engine inside from
rusting (Fig.33).
Drain out original fuel of the fuel tank and refuel
Drain out original fuel of the fuel tank and refuel;
Drain out fuel in the carburettor○
1
;
Empty the deposit cup.
Drain out original fuel of the fuel tank and refuel;
Empty the fuel cup in the carburettor○
1
;
Empty the deposit cup;
Move the engine from the storage place, fill it with
fuel, then start up it.
Screw off the drain plug and drain out fuel in the carburettor.
Turn off the engine switch first, disconnect the deposit cup and empty it.
Note: For the sake of environmental protection, we recommend to fill the
discarded fuel into a closed container and bring to local recycling station.
Never pour freely.
Engine Operation (cont’d)
To Next Page
Loading...