Strong SRT 4300 - Timer Settings; Parental Control Setup

15
User Settings
1.4.Timer Setting
Timer Number
From 1 to 8, you can set total 8 different
Timers
Timer Set
To open or close each Timer, if the Timer
Set is off, then you can not continue to set
Timer.
Timer Control
There are total 3 types of Timer type: Start time only; Stop time only; Both on.
Repeat Mode
There are 3 types of Repeat Mode: one time, week(1-5), week(6-7).
Start time
:
To set STB power on time.
Stop time
:
To set STB power off time.
Channel
To select the channel what you want .
TV/RADIO
To shift between TV or radio.
1.5. Parental Control
To prevent the unauthorized Accessing of
your STB, you can set the Parental
control password to you receiver. (Default
password: 0000)
Channel Manager Lock:
To lock the
Channel Edit menu to prevent
unauthorized adjusting of Channel.
Installation Lock:
To lock the installation
menu to prevent unauthorized adjusting of Installation.