What causes other signal problems on Strong HDTV?
For other reception or signal-related issues with your Strong HDTV, check the cable connections to ensure they are secure and free from moisture. If you are using DVB-S/S2 and -T/T2, inspect all equipment between the reception point and the TV. If there is heavy rain or a thunderstorm, wait until it passes.
Why is there no color on my Strong HDTV?
If your Strong HDTV has no color, first check that all devices are properly connected with good cables. Then, try adjusting the saturation settings. It's also possible that the current program is being broadcast in black and white, so try switching to another channel.
How to fix video playback issues on Strong HDTV?
If you're experiencing picture freezing or distortion when playing videos on your Strong HDTV, especially HD content, the read/write speed of your USB device might be too slow. Use a USB storage device with sufficient speed and space, as pen drives may not provide adequate performance.
What to do if my Strong HDTV has no picture but normal sound?
If your Strong HDTV has sound but no picture, try adjusting the brightness and contrast settings. It's also possible that you've tuned into a radio channel, the program isn't transmitting video signals, or there's some other broadcasting issue.
How to fix frozen picture on Strong HDTV?
If the picture and sound on your Strong HDTV are frozen, or you see macro blocks or distortion, it could be due to a weak reception signal or interference. For DVB-S/S2 and DVB-T/T2, electromagnetic or high-frequency signals might be the cause. For DVB-T/T2, signal reflections may be the issue. For DVB-C and DVB-S/S2, long connection cables could be causing too much signal attenuation. Also, ensure your antenna is properly adjusted, especially after storms.
Why does my Strong HDTV turn off by itself?
Your Strong HDTV might be switching off automatically because the automatic STBY function is enabled. By default, the TV turns off after 4 hours to save energy and comply with European regulations. You can check and adjust this setting in the TV's menu.
What to do if my Strong HDTV shows no signal?
If your Strong HDTV displays 'No Signal', the TV might not be properly connected to a signal source like DVB-C, DVB-S/S2, or DVB-T/T2. Alternatively, the antenna might not be correctly aligned, or there could be a malfunction or defect in the connection and distribution equipment. For DVB-T/T2, ensure active antennas have antenna power switched on or external power connected and check coverage with service providers. For DVB-S/S2, verify that tuner and LNB parameters are correct.
How to fix a Strong HDTV remote control that is not working?
If your Strong HDTV remote isn't working, start by changing the batteries, using low self-discharge rechargeable batteries if applicable. Ensure the batteries are correctly installed and that you haven't mixed different types. Also, check if anything is blocking the IR sensor on the TV or if bright light is interfering with it.
To Next Page
General
