Fusion® User Manual 7Zephyr® User Manual 7
Installation: Case Removal From Skid
Carefully Remove Case From Pallet:
• Check that casters are unlocked.
• Caution! 4 people are required for this task!
• Carefully lower to the oor (using a ramp if available).
• Slide pallet from under case as required.
• Maintain support of the case at all times, or the center of
gravity may cause the case to fall.
• See the illustration at right.
Casters:
• After the case is at the desired position, lock they casters
to secure.
• Replace all front, rear, and end panels.
Ramp
Support
case while
moving
Casters
To Next Page
Loading...
