To Next PageTo Next Page
Need help?Do you have a question about the Structural Concepts Oasis BV3632 and is the answer not in the manual?
Details product purpose, operating conditions, and NSF/ANSI classifications for optimal performance.
Covers adherence to electrical, plumbing, safety codes, and general hazard alerts.
Highlights critical risks like electrical hazards, moving parts, hot surfaces, and chemical exposure.
Provides guidance on case placement, spacing, and wiring diagram details for correct setup.
Covers lamp replacement, electrical safety, adverse conditions, and condensate pan checks.
Instructions for removing case shipping brackets attached to the skid before unit removal.
Steps for raising levelers and using a ramp to safely remove the case from its skid.
Ensuring the case is correctly positioned and aligned with other units before leveling.
Lowering levelers to the floor to make the case level and plumb for proper operation.
Steps for connecting the battery to the Eaton 3S unit and ensuring proper terminal connection.
Instructions for charging the battery for 24 hours before operating the electronically controlled door.
Procedure for removing the front grille to access door controls, thermostat, and power switch.
Using the door control switch to raise and lower the electronically controlled rolling door.
Explains the automatic door closure feature and the steps for resetting the system.
Steps for accessing the condenser package by sliding it out from under the case.
Ensuring the condensate pan is correctly positioned and plugged in to prevent leaks.
Connecting the power cord and locating/using the main power switch to turn on the unit.
Explains that the door cannot be manually operated and relies solely on electronic controls.
Verifying proper airflow from evaporator coil fans for correct functioning and performance.
Locating and accessing the TXV, including removal of the TXV cover for service.
Details the location and function of the honeycomb air diffuser within the discharge air duct.
Guidance on LED light fixture connection, replacement, and safety precautions for proper lighting.
Guidelines for maintaining proper wall spacing and rear venting for optimal temperature management.
Instructions for locking and unlocking the unit's casters for secure and stable placement.
Illustrates and labels components of the self-contained hot gas loop condensate package.
Presents further detailed illustrations and labeling of the condensate package components.
Provides a third detailed illustration of the condensate package components.
Provides cautions on product placement to prevent freezing or warming and ensure proper airflow.
Details the recommended temperature ranges for products at the front versus the rear of the case.
Specifies daily cleaning procedures for air deflectors, shelves, and glass/mirror surfaces.
Outlines weekly tasks for tub/drain and filters, and monthly tasks for air return grilles.
Instructions for cleaning the tub, coils, fans, motors, and drain area within the case interior.
Steps for cleaning condenser coils, refrigeration assembly, and associated parts.
Detailed guide for cleaning the condensate pan, including wicking material replacement.
Step-by-step instructions for removing, cleaning, and reinstalling the honeycomb air diffuser.
Procedure for cleaning the condensing coil using the optional Clean Sweep system.
Addresses problems with case alignment, water on the floor, and condensate pan malfunctions.
Covers fan noise, fans not working, and blank digital display problems.
Diagnoses issues with case lights, control display flashing, and maintaining desired temperatures.
Diagnoses issues related to head pressure, condensing fans, and refrigerant charge for system health.
Addresses low/high suction pressure, superheat, and evaporator coil icing issues.
Guides on finding serial labels and interpreting the data for various case models.
Provides contact information and required details for technical service and support.
Helps identify common CAREL and Dixell programmable controllers used on the cases.
Instructions for accessing detailed information on programmable controllers via QR code.
Provides phone number and hours for technical service and warranty support inquiries.
Instructions for accessing the case's limited warranty details via QR code.
General| Manufacturer | Structural Concepts |
|---|---|
| Model | Oasis BV3632 |
| Category | Commercial Food Equipment |
| Width | 36 inches |
| Depth | 32 inches |
| Temperature Range | 38°F - 40°F |
| Shelving | Adjustable Shelves |
| Lighting | LED Lighting |
| Voltage | 120V |
| Type | Display Case |
| Power Supply | 120V |
| Door Type | Glass Door |
