Stryker 1588-010-000 User Manual (English)

Questions and Answers:

J
Jacob KingSep 5, 2025
What to do if Stryker 1588-010-000 Camcorder optics are dirty?
- D
  Dr. Scott ChristensenSep 5, 2025
  To address optics that are dirty on your Stryker Camcorder: * Rotate the scope. If dust particles in the picture rotate, the dust is located on the scope itself. Follow the manufacturer’s instructions for cleaning the eyepiece and negative lens. * If particles in the picture do not move when you rotate the scope, the particles are located on the coupler or camera. Remove the scope and clean the window on the front of the coupler with a dry or alcohol-tipped cotton swab. * Disassemble the scope, coupler, and camera head, and clean and dry all windows on the components. * Ensure all components are completely dry before reassembling them, or fogging may result.
S
Shaun SmithSep 6, 2025
How to fix image that is not well centered on Stryker Camcorder?
- E
  Elizabeth PierceSep 6, 2025
  To resolve a Stryker Camcorder image that is not well centered, release the scope from the coupler and then reconnect it, ensuring the scope is seated correctly in the coupler.
R
Ruben BonillaSep 8, 2025
What to do if Stryker 1588-010-000 touchscreen freezes?
- B
  Bradley SandersSep 8, 2025
  If the touchscreen on your Stryker Camcorder freezes, turn off the console, wait 3 seconds, and turn it back on.
M
Michelle GarciaSep 9, 2025
How to fix white balance quality that is not good on Stryker 1588-010-000?
- T
  taylorchadSep 10, 2025
  If the White Balance quality is not good on your Stryker Camcorder, refer to the solutions for when the picture is too dark or too bright. Also, perform the White Balance test with the light source connected to the scope, using metal-halide, xenon, or LED lighting (avoid fluorescent lighting).