To Next Page
T
timothy70Sep 23, 2025
What to do if Stryker 1588-010-000 Camcorder displays E1 error code?
- SStephanie HarrisonSep 23, 2025
To address an E1 error code on the Stryker Camcorder, turn off the console, wait 3 seconds, and turn it back on.
What to do if Stryker 1588-010-000 Camcorder displays E1 error code?
To address an E1 error code on the Stryker Camcorder, turn off the console, wait 3 seconds, and turn it back on.
How to fix noise or snow on Stryker 1588-010-000 picture when using electrocautery probes?
To resolve noise or snow on the Stryker Camcorder picture when using electrocautery probes: * Plug the electrocautery generator into a separate electrical outlet and separate the 1588 AIM console power cord from the electrocautery power cord. * Separate the camera cable from the electrocautery cable. * Reposition the electrocautery grounding pad on the patient.
How to fix blurry picture on Stryker 1588-010-000 Camcorder?
To resolve a blurry picture on your Stryker Camcorder: * Ensure the coupler or C-mount scope is in focus. * On the Home screen, verify the Surgical Specialty is not set to FLEXI-SCOPE unless you are using a flexible scope. * Disassemble the scope, coupler, and camera head, then clean and dry all windows on these components.
How to fix bright picture on Stryker Camcorder?
To correct the Stryker Camcorder picture if it's too bright: * Decrease the camera Light Level. * Decrease the light source output. * Turn off the DRE Desaturation function.
How to fix noise or snow on Stryker 1588-010-000 picture when not using electrocautery probes?
To fix noise or snow on Stryker Camcorder picture when not using electrocautery probes: * Confirm all cable connectors are securely attached. * Check for and replace faulty video cables.
What to do if Stryker Camcorder displays E2 error code?
To address an E2 error code on the Stryker Camcorder, turn off the console, wait 3 seconds, and turn it back on.
What to do if Stryker 1588-010-000 displays E4 error code?
To address an E4 error code on the Stryker Camcorder, ensure the vent holes on the console are not obstructed. If the issue persists, turn off the console, wait 3 seconds, and turn it back on.
What to do if Stryker 1588-010-000 displays E3 error code?
To address an E3 error code on the Stryker Camcorder, turn off the console, wait 3 seconds, and turn it back on.
How to fix image that is not well centered on Stryker Camcorder?
To resolve a Stryker Camcorder image that is not well centered, release the scope from the coupler and then reconnect it, ensuring the scope is seated correctly in the coupler.
What to do if Stryker 1588-010-000 Camcorder shows “Restart Camera Console” message?
To address the “Restart Camera Console” message (Color bar background) on Stryker Camcorder: * Turn off the console, wait 3 seconds, and turn it back on. The camera head may have temporarily shut down due to overcurrent. * After sterilization, ensure the camera head has cooled down before connecting it to the console.
Important safety notes to prevent potential damage to the device and ensure safe operation.
General warnings to avoid injury to users, patients, and device damage during operation.
Safety notices regarding laser radiation when using the Endoscopic Near-Infrared Visualization (ENV) mode.
Safety precautions to avoid injury or damage when using the camera with a light source.
Instructions for connecting the camera console to power, video outputs, and the light source.
Illustrates the interconnection of the camera, console, SDC3, and light source.
Step-by-step guide to connecting the camera head to the console.
Step-by-step guide to performing the white balance test for accurate color reproduction.
Lists common error codes (E1-E4) and solutions for a frozen touchscreen.
Provides solutions for picture quality problems like darkness, brightness, noise, and foggy images.
Solutions for camera head button errors, device recognition, and ENV mode enablement issues.
General| Model | 1588-010-000 |
|---|---|
| Category | Camcorder |
| Resolution | 1080p |
| Sensor Type | CMOS |
| Type | Medical |
| Waterproof | Yes |
| Camera Head Cable Length | 3 m |
