To Next Page
O
omar72Sep 23, 2025
What to do if Stryker 1588-210-105 displays E1 error code?
- PPhilip EdwardsSep 23, 2025
To address an E1 error code on the Stryker Camcorder, turn off the console, wait 3 seconds, and turn it back on.
What to do if Stryker 1588-210-105 displays E1 error code?
To address an E1 error code on the Stryker Camcorder, turn off the console, wait 3 seconds, and turn it back on.
How to fix noise or snow on Stryker 1588-210-105 picture when using electrocautery probes?
To resolve noise or snow on the Stryker Camcorder picture when using electrocautery probes: * Plug the electrocautery generator into a separate electrical outlet and separate the 1588 AIM console power cord from the electrocautery power cord. * Separate the camera cable from the electrocautery cable. * Reposition the electrocautery grounding pad on the patient.
How to fix blurry picture on Stryker 1588-210-105 Camcorder?
To resolve a blurry picture on your Stryker Camcorder: * Ensure the coupler or C-mount scope is in focus. * On the Home screen, verify the Surgical Specialty is not set to FLEXI-SCOPE unless you are using a flexible scope. * Disassemble the scope, coupler, and camera head, then clean and dry all windows on these components.
How to fix bright picture on Stryker 1588-210-105 Camcorder?
To correct the Stryker Camcorder picture if it's too bright: * Decrease the camera Light Level. * Decrease the light source output. * Turn off the DRE Desaturation function.
How to fix noise or snow on Stryker 1588-210-105 Camcorder picture when not using electrocautery probes?
To fix noise or snow on Stryker Camcorder picture when not using electrocautery probes: * Confirm all cable connectors are securely attached. * Check for and replace faulty video cables.
What to do if Stryker Camcorder displays E2 error code?
To address an E2 error code on the Stryker Camcorder, turn off the console, wait 3 seconds, and turn it back on.
What to do if Stryker 1588-210-105 displays E4 error code?
To address an E4 error code on the Stryker Camcorder, ensure the vent holes on the console are not obstructed. If the issue persists, turn off the console, wait 3 seconds, and turn it back on.
What to do if Stryker 1588-210-105 displays E3 error code?
To address an E3 error code on the Stryker Camcorder, turn off the console, wait 3 seconds, and turn it back on.
How to fix image that is not well centered on Stryker 1588-210-105 Camcorder?
To resolve a Stryker Camcorder image that is not well centered, release the scope from the coupler and then reconnect it, ensuring the scope is seated correctly in the coupler.
What to do if Stryker Camcorder shows “Restart Camera Console” message?
To address the “Restart Camera Console” message (Color bar background) on Stryker Camcorder: * Turn off the console, wait 3 seconds, and turn it back on. The camera head may have temporarily shut down due to overcurrent. * After sterilization, ensure the camera head has cooled down before connecting it to the console.
General cautions for safe operation and to avoid device damage.
Safety warnings for users and patients to avoid injury or device damage.
Safety warnings specific to Endoscopic Near-Infrared Visualization (ENV) mode.
Explains the P, W, Up, and Down button functions.
Navigating menus and using functions via the console touchscreen.
Solutions for E1-E4 error codes and touchscreen freezing.
Addressing restart/system error messages and no color bar issues.
Resolving issues with white balance, brightness, noise, and centering.
Includes manual and automated cleaning steps for the camera head and console.
Guidelines for high-level disinfection and various sterilization methods.
General
