EasyManua.ls Logo

Stryker CrossFlow - Symbols and Terminology Guide; Console and Warning Symbols; Packaging and Labeling Symbols

Stryker CrossFlow
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN-40
DRAFT
Symbols and Terminology
This device and its labeling contain symbols that provide important information for the safe and proper use
of the device� These symbols are dened below�
Warning
Warning/Caution: See Instructions for Use
General warning sign, Multiple socket-outlet,
maximum allowed continuous output
Front Console
Power USB port
Auxiliary receptacle Footswitch receptacle
Hand control receptacle
Rear Console
Complies with CSA C22�2 No� 601�1, UL 60601-1 Emits RF radiation
Equipotential ground plug- connects to potential
equalization conductorThe resulting medical
electrical system shall follow all applicable IEC
60601-1 requirements
Stryker Firewire- enables rewire connection
with Stryker rewire devices (Crossre, iSwitch,
SDC3)
Fuse rating Type BF Applied Part
Probe Shaver
Alternating Current RoHS 50years
IPX1
Protection against vertically falling objects Follow instructions for use
This product contains electrical waste or electronic equipment� It must not be disposed of as unsorted municipal
waste and must be collected separately
Packaging/Labeling
Manufacturer
Date of manufacture
Authorized representative in the European
community
Consult instructions for use

Other manuals for Stryker CrossFlow

Related product manuals