6400-099-700 Rev-AA EN
www.stryker.com 3
User/Patient Safety
WARNINGS:
• Before using this equipment, or any component compatible with
this equipment, read and understand the instructions for use.
Pay particular attention to safety information. Become familiar
with the equipment before use.
• Only healthcare professionals trained and experienced in the
use of this medical device should operate this equipment.
• The healthcare professional performing any procedure is
responsible for determining the appropriateness of this
equipment and the specific technique for each patient. Stryker,
as a manufacturer, does not recommend surgical technique.
• ALWAYS allow the equipment to reach the specified operation
temperature range before use. See the Specifications section.
• Upon initial receipt and before each use, clean and sterilize
the equipment as indicated. See the care instructions manual
supplied with the equipment.
• Upon initial receipt and before each use, inspect each
component for damage. DO NOT use any equipment if damage
is apparent or the inspection criteria are not met. See the care
instructions manual supplied with the equipment.
• DO NOT use this equipment in areas in which flammable
anesthetics or flammable agents are mixed with air, oxygen, or
nitrous oxide.
For Use With
DESCRIPTION REF
TPS™ Consoles with software version
4.0 and higher
5100-0XX-000 Series
CORE Powered Instrument Driver
(console) with software version 5.7 or
higher
5400-050-000
CORE 2 Console 5400-052-000
Accessories
WARNINGS:
• Use only Stryker-approved equipment, unless otherwise
specified.
• DO NOT modify any equipment without the authorization of the
manufacturer.
To Next Page
Loading...