6400-099-700 Rev-AA EN
www.stryker.com 5
Features
Handpiece
A
F
E
B
D
C
G
H
A Release Button – Press to release an attachment from
the handpiece.
B Attachment Connector
C Applied Part – The distal end of the handpiece and
the attachment (as defined by the Product Safety
Certification standards listed in the Specifications section
of the instructions for use supplied with the console.)
D Attachment
E Reverse Trigger – Press this pressure sensitive trigger to
obtain variable speed reverse operation.
F Forward Trigger – Press this pressure sensitive trigger to
obtain variable speed forward operation.
G Cord Receptacle
H Function Switch – Adjust this switch to the desired
function. Functions and switch positions are described
below.
To Next Page
Loading...
