Need help?Do you have a question about the Stryker System 6 6205 and is the answer not in the manual?
General| Power Requirements | 100-240 VAC, 50/60 Hz |
|---|---|
| Power Source | Battery and AC Power |
| Battery Backup | Yes |
| Battery Type | Sealed lead-acid battery |
| Sterilization | Compatible with standard sterilization methods |
Describes the surgical procedures for which the handpiece is intended, involving drilling, reaming, and cutting.
Lists compatible battery packs and aseptic kits with their reference numbers.
Covers warnings regarding training, inspection, maintenance, EMC, and operational risks.
Details the purpose of various controls like triggers, shifter knob, and F/R/Safe control.
Explains the meaning of operational symbols for forward, reverse, oscillate, and safe modes.
Step-by-step guide on how to attach accessories to the handpiece, including safety precautions.
Instructions for inserting and securing the battery pack into the handpiece.
Guides on operating the handpiece in forward, reverse, or oscillate modes using triggers and safety control.
Explains how to adjust the handpiece speed between DRILL and REAM modes using the shifter knob.
Procedure for safely detaching accessories from the handpiece.
Steps to disconnect and remove the battery pack from the handpiece.
Addresses issues like handpiece not running, motor running but accessory not moving, and attachment wobble.
Details checks required before each use to ensure proper working condition.
Guidelines for using original packaging materials for storage or transport to ensure longevity.
Procedure for cleaning handpieces and attachments using brushes and enzymatic cleaner, with drainage instructions.
Refers to separate care instructions supplied with battery packs and chargers.
Details sterilization methods like 'Flash' Autoclave, Hi Vac, ETO, and Gravity sterilizers for handpieces and attachments.
Directs users to consult separate care instructions for sterilizing battery packs.
Lists model, size, weight, speed, duty cycle, approvals, power supply, and enclosure protection.
Declares guidance on RF emissions compliance and electromagnetic environment suitability.
Provides guidance on immunity tests for RF, ESD, transients, surges, and power frequency magnetic fields.
Specifies separation distances for portable/mobile RF communications equipment based on transmitter output power.
To Next Page