Need help?Do you have a question about the Stryker S3 and is the answer not in the manual?
General| Weight Capacity | 500 lbs (227 kg) |
|---|---|
| Maximum Patient Weight | 500 lbs (227 kg) |
| Bed Frame Material | Steel |
| Type | Hospital Bed |
| Bed Width | 35 inches (89 cm) |
| Caster Size | 5 inches (12.7 cm) |
| Electrical Requirements | 120 VAC, 60 Hz |
| Width | 35 inches (89 cm) |
| Power Requirements | 120 VAC, 60 Hz |
| Power Backup | Battery backup available |
| Accessories | IV pole |
| Siderails | Yes |
Details the capabilities and features of the 3002 S3 MedSurg Bed, including articulation and optional features.
Specifies the intended use of the 3002 S3 MedSurg bed in hospital environments and for whom it is designed.
Details the physical and electrical specifications of the 3002 S3 MedSurg bed and its options.
Outlines hardware, software, and network requirements for implementing the iBed Wireless system.
Diagram identifying key components and features of the 3002 S3 MedSurg Bed.
Provides contact details for Stryker Customer Service and Technical Support.
Step-by-step instructions for connecting and verifying the optional nurse call communication system.
Instructions for initial setup and verification of the optional Zoom motorized drive wheel.
Instructions for installing the iBed Locator and configuring wireless connection settings.
Details how to apply and release the brake pedals on the bed, including indicator lights.
Instructions and warnings for transporting the bed using the optional Zoom motorized drive wheel.
Instructions for activating the CPR release to quickly flatten the bed for emergency access.
Instructions for raising siderails to their highest position and ensuring they are locked.
How to activate the nurse call function and establish communication with the nurse station.
Diagram and description of the buttons and functions on the outside siderail operator control panel.
Diagram of the patient control panel located on the inside siderail.
Diagram and descriptions of bed control functions like Trendelenburg, height, Fowler, and CPR.
Instructions for using the scale function to weigh a patient and set the scale to zero.
Overview of the iBed Awareness system, its monitoring capabilities, and how to arm/disarm it.
Diagram and description of controls for the Zoom motorized drive, including engage and release.
Diagram and description of the motion pendant controls for Fowler and gatch adjustments and nurse call.
To Next Page
