54 3006-209-001 REV B www.stryker.com
Operation
Setting the alarm tones
S3 has 10 alarm tone settings.
Note: The alarm tone you choose is the same tone used for all activated alarm options.
To set an alarm tone:
1. Press the Menu button (A). See Menu display on page 47.
2. Scroll to Advanced options.
3. Press the Enter button (F). See Menu display on page 47.
4. Scroll to Choose Exit Alarm.
5. Press the Enter button (F). See Menu display on page 47.
6. Scroll through the alarm tones.
Note: A brief sample of the tone plays as you scroll through the tone options.
7. Press the Enter button (F). See Menu display on page 47.
Note:
A confirmation notification indicates that you set the alarm tone.
Setting the brake alarm
You can set an alarm to alert you when the brake is not set and the product is plugged in.
To set the brake alarm:
1. Press the Menu button (A). See Menu display on page 47.
2. Scroll to Advanced options.
3. Press the Enter button (F). See Menu display on page 47.
4. Scroll to Brake Alarm.
5. Press the Enter button (F). See Menu display on page 47.
6. Select On.
7. Press the Enter button (F). See Menu display on page 47.
Note:
A confirmation notification indicates that you set the alarm tone.
Setting an audible iBed Awareness alarm
You can set an audible alarm to alert you when an iBed Awareness parameter condition is compromised and the
product is plugged in.
To set an audible iBed Awareness alarm:
1. Press the Menu button (A). See Menu display on page 47.
2. Scroll to Advanced options.
3. Press the Enter button (F). See Menu display on page 47.
4. Scroll to Awareness Alarm.
5. Press the Enter button (F). See Menu display on page 47.
6. Select On.
7. Press the Enter button (F). See Menu display on page 47.
Note:
A confirmation notification indicates that you set the alarm tone.
To Next Page
Loading...
Need help?
General
