What to do if Stryker Medical Equipment SDC3 does not recognize an SFB or FireWire device?
If the SDC3 does not recognize an SFB/FireWire device, follow these steps: 1. Set the SDC3 power to off. 2. Connect the SFB/FireWire cable to both the device and the SDC3. 3. Set the SDC3 power to on.
How to troubleshoot no live video on the monitor with Stryker Medical Equipment?
Ensure the camera is powered on, check the cable connections, and verify the correct video source is selected.
What to do if there is no live video in PIP on preview on Stryker SDC3?
Check the cable connections, ensure the camera is powered on, verify the correct video source is selected, and confirm you are in PIP mode.
What to do when Stryker Measuring Instruments video limit reached?
If you've reached the video limit on your Stryker Measuring Instruments, start a new case to capture more videos.
What to do if Stryker Measuring Instruments has error upgrading software?
If you encounter an error while upgrading the software on Stryker Measuring Instruments, insert the upgrade dongle in the save screen.
What to do if Stryker Measuring Instruments says 'USB space insufficient'?
If you receive a 'USB space insufficient' error while using Stryker Measuring Instruments, make sure that there is available free space on the USB media.
How to fix no videos written to the USB on Stryker Medical Equipment?
To address the issue where no videos are written to the USB on Stryker Medical Equipment, ensure that “write videos to USB” is selected in the save settings.
How to fix no videos written to the network on Stryker Medical Equipment?
To resolve the issue of no videos being written to the network on Stryker Medical Equipment, ensure that “write videos to Network” is selected in the save settings.
Why are no videos written to the USB from Stryker Measuring Instruments?
If no videos are being written to the USB drive when using Stryker Measuring Instruments, verify that the 'write videos to USB' option is selected in the save settings.
What to do for error disk corrupt on Stryker SDC3?
If you encounter the message 'Error: Disk corrupt. Please try again...' on Stryker Medical Equipment, it means the media is corrupt. Insert a new disc to continue.
Important warnings and cautions for safe operation and device protection.
Capturing still images and recording video from a single camera source.
Recording and viewing video from two sources simultaneously (PIP, Synchronized, Independent).
Configuring FTP, network adapters, Wi-Fi, streaming, and share settings.
Configuring Studio3, DICOM, Stryker Link, Cloud, PowerShare, and EMR integration.
General| Display | LCD |
|---|---|
| Screen Size | 15" |
| Resolution | 1024 x 768 (XGA) |
| Connectivity | Ethernet |
| Supported File Formats | JPEG, BMP |
| Category | Medical Equipment |
| Video Output | DVI |
| Touchscreen | No |
To Next Page
