13
Creating Patient Cases
The SDC3 organizes all the data associated with a patient into a patient “case�” Patient cases
include information about the patient, the procedure, and any pictures or video captured during
the procedure� Patient cases can be created, accessed, modied, and saved to the SDC3 hard disk
or to external media, such as USB drives, CD/DVD, or network servers�
Creating a New Patient Case
To create a new patient case:
1� On the Home screen, press the NEW CASE
button�
2� From the conrmation screen, press OK
to conrm the new case� The Surgeon Prole
screen shows�
Note: If a patient case has already been started and you have not saved any information to the
case, the SDC3 asks if you want to discard that case (the “current case”) before creating a new
case. If you do not want to discard the current case, you can access it through the CURRENT
CASE button from the Home screen.
3� Choose a Prole for the case to go to the Capture screen�
Accessing a Current Patient Case
To access a current patient case (one for which patient data, pictures, or video has already been
saved to the SDC3):
1� On the Home screen, press the CURRENT CASE button� The Capture Screen appears�
2� On the Capture Screen, select the correct patient case from the CURRENT CASE PATIENT
ID dropdown list�
To Next Page
Loading...
Need help?
General
