54
General Audio Settings
1
4
2 3
1� Press the AUDIO tab to see the General Audio settings screen�
2� The +⁄− buttons adjust volumes for the Headset, Speaker, and Microphone�
3� The MUTE buttons mute the Headset, Speaker, or Microphone�
4� Press the OSD AUDIO METER button to show the strength of the audio input on the
surgical display�
5� Press the OSD DEVICE CONTROL button to show or hide the Device Control menu on the
surgical display�
Note: The OSD Audio Meter and OSD Device Control buttons are only enabled when the
option Voice Control Package is installed.
To Next Page
Loading...
