Stryker SDC3 - Device Presets Settings

27
Device Presets Settings
Access the Device Presets settings for the current surgeon from the DEVICE PRESETS screen�
Only the saved presets for the current Specialty or Procedure are displayed from this screen� To
set up Device Presets, go to Settings > Proles, and press the SPECIALTY/PROCEDURE button�
Refer to the Proles Settings section of this manual for more detailed instructions�
2
1
34 5
6
1� Select the DEVICE PRESETS button to go to the Device Presets Settings screen�
2� From the Specialty menu, choose the correct Specialty�
3� From the Procedure menu, choose the correct Procedure�
4� The saved presets are shown in the Device Presets box�
5� Press the SELECT NONE button to deselect all of the devices and settings in the Device
Presets box� Press the SELECT ALL button to select all of the devices and settings. You
can also press the individual checkboxes to select or deselect a device or a setting�
6� Press the APPLY button to apply the selected Device Presets� The Device Presets Settings
screen automatically closes�