Stryker SDC3 - Setting up Access Control

52
Setting Up Access Control
From the Access Control Setup Screen, you can turn on Active Directory Authentication, set
passwords, or both, for logging in to the SDC3�
Active Directory Setup
1� Enter the Domain Server name, and the username and password to access the active
directory�
2� Press AUTHENTICATE to make sure that the server connection is successful, and the
credentials are valid�
Operator Password Setup
3� Enter an Administrator password in the Admin Operator Password eld� The Administrator
has permission to create and edit surgeon proles, and congure server settings�
4� Enter a Normal Operator password in the Normal Operator Password eld� The Normal
Operator cannot access settings for proles or servers�