Stryker SDC3 - Surgical Timeout Checklist Screens; Surgical Timeout Checklist Start Screen

17
Surgical Timeout Checklist Screens
To set up or activate the surgical timeout checklist, go to Settings > General > Misc� To launch the
Surgical Timeout Checklist, go to either Current Case or New Case, then go to the Edit Patient tab�
Surgical Timeout Checklist Start Screen
Note: Before the Surgical Timeout Checklist launches, you are asked to conrm the current
date and time.
1
2
3
1� The Surgical Timeout Launch Screen is activated through the Edit Patient Tab� The default
value is ON�
2� User is asked to verify correct date and time for Step 1�
3� Press OK once the correct date and time are veried and Step 2 will be activated�
4� Press the START button to start the verication process�