Stryker SDC3 - DICOM Server Settings

77
DICOM Server Settings
To congure DICOM server settings, go to Current Case > Server, and conrm that the DICOM
menu is active�
2
3
5
4
1
From the DICOM menu, you can:
1� Toggle the IPV4/IPV6 button to select the connection type�
2� Select a connection name, or create a new connection�
3� Dene the Store, Q/R, and Storage Commit (SC)�
4� Congure the required elds for cases saved to DICOM
5� Congure the DICOM settings�
Note: For full instructions on conguring the DICOM server, refer to the DICOM surgeon guide
(P15650).