29
Video Settings: Channel 2
Channel 2 video settings are accessible from the VIDEO SETTINGS tab�
1
4
3
2
1� Press the CHANNEL 2 tab to go to the “Video Settings: Channel 2” screen� By default,
Channel 2 recording mode is ATE, and disc format is the same as selected for Channel 1�
2� The drop-down menus show selections for Recording Format, Record Resolution, and Record
Bitrate�
3� Press the EXIT button to close the settings screen and return to the Capture screen�
4� The drop-down menu shows available selections for video sources, based on what is
connected to the SDC3�
To Next Page
Loading...
