Stryker SDC3 - Setting up the Surgical Timeout Checklist

53
Setting Up the Surgical Timeout Checklist
The Surgical Timeout Checklist Setup screen shows when the SETUP button is selected in the
General Miscellaneous Settings screen�
654321
7
1� Press the FACTORY DEFAULT button to restore the factory default checklist�
2� Press the IMPORT and EXPORT buttons to import a checklist from a USB storage device or
export a checklist to a USB storage device�
3� Press anywhere on a question or line to select it�
4� Press the ADD, EDIT, or DELETE buttons to make changes to the selected question or line�
5� Press the arrow buttons to move the selected line up or down in the checklist�
6� Press the SAVE button to save changes to the checklist�
7� Press the EXIT button to go back to the General Miscellaneous Settings screen�