How to fix error reading archived cases from DVD or CD on Stryker SDC3?
If you encounter an error reading archived cases from a DVD/CD on Stryker Medical Equipment, reboot the system if you have just written the case. If the problem persists, check the disc on a different system.
What to do if error saving settings on Stryker Medical Equipment?
If you are unable to save settings on Stryker Medical Equipment, reboot the system to restore previous settings.
What to do if Stryker Medical Equipment SDC3 does not recognize an SFB or FireWire device?
If the SDC3 does not recognize an SFB/FireWire device, follow these steps: 1. Set the SDC3 power to off. 2. Connect the SFB/FireWire cable to both the device and the SDC3. 3. Set the SDC3 power to on.
General| Display | LCD |
|---|---|
| Screen Size | 15" |
| Resolution | 1024 x 768 (XGA) |
| Connectivity | Ethernet |
| Supported File Formats | JPEG, BMP |
| Category | Medical Equipment |
| Video Output | DVI |
| Touchscreen | No |
Important warnings and cautions for safe operation and device protection.
Capturing still images and recording video from a single camera source.
Recording and viewing video from two sources simultaneously (PIP, Synchronized, Independent).
Configuring FTP, network adapters, Wi-Fi, streaming, and share settings.
Configuring Studio3, DICOM, Stryker Link, Cloud, PowerShare, and EMR integration.
To Next Page
