Why I am getting error saving more than 4GB files to the USB on Stryker Medical Equipment?
If you're having trouble saving more than 4GB files to the USB on Stryker Medical Equipment, ensure that the USB is formatted as NTFS, because FAT32 does not support file sizes larger than 4GB.
How to fix error disc drive busy on Stryker Medical Equipment?
If you receive the error 'Error: Disc drive busy' on Stryker Medical Equipment, ensure the disc drive is not currently in use. If the error persists, reboot the machine.
What to do for error disk corrupt on Stryker SDC3?
If you encounter the message 'Error: Disk corrupt. Please try again...' on Stryker Medical Equipment, it means the media is corrupt. Insert a new disc to continue.
Why can't I save files larger than 4GB to USB on Stryker Measuring Instruments?
If you encounter an error when saving files larger than 4GB to a USB drive with Stryker Measuring Instruments, ensure that the USB drive is formatted as NTFS. The FAT32 format does not support files larger than 4GB.
What to do when Stryker Measuring Instruments video limit reached?
If you've reached the video limit on your Stryker Measuring Instruments, start a new case to capture more videos.
Why are no videos written to the USB from Stryker Measuring Instruments?
If no videos are being written to the USB drive when using Stryker Measuring Instruments, verify that the 'write videos to USB' option is selected in the save settings.
How to resolve print errors on Stryker SDC3?
To fix print errors on Stryker Medical Equipment, follow these steps: 1. Check for paper jams. 2. Ensure the printer has enough ink. 3. Make sure the printer door is closed. 4. Ensure the printer has paper. 5. Verify the printer is powered on. 6. Check the printer cable connection.
How to fix login failure on Stryker SDC3?
To resolve login failures on Stryker Medical Equipment, ensure you are using the correct username and password.
How to resolve no live video PIP on monitor issue with Stryker SDC3 Medical Equipment?
Check the cable connections. Make sure that the camera is powered on. Make sure that the proper video source is selected. Make sure that the monitor OSD PIP is enabled via the application.
What to do if there is no live video in PIP on preview on Stryker SDC3?
Check the cable connections, ensure the camera is powered on, verify the correct video source is selected, and confirm you are in PIP mode.
Important warnings and cautions for safe operation and device protection.
Capturing still images and recording video from a single camera source.
Recording and viewing video from two sources simultaneously (PIP, Synchronized, Independent).
Configuring FTP, network adapters, Wi-Fi, streaming, and share settings.
Configuring Studio3, DICOM, Stryker Link, Cloud, PowerShare, and EMR integration.
General| Display | LCD |
|---|---|
| Screen Size | 15" |
| Resolution | 1024 x 768 (XGA) |
| Connectivity | Ethernet |
| Supported File Formats | JPEG, BMP |
| Category | Medical Equipment |
| Video Output | DVI |
| Touchscreen | No |
To Next Page
