How to resolve no live video PIP on monitor issue with Stryker SDC3 Medical Equipment?
Check the cable connections. Make sure that the camera is powered on. Make sure that the proper video source is selected. Make sure that the monitor OSD PIP is enabled via the application.
How to fix login failure on Stryker SDC3?
To resolve login failures on Stryker Medical Equipment, ensure you are using the correct username and password.
How to resolve print errors on Stryker SDC3?
To fix print errors on Stryker Medical Equipment, follow these steps: 1. Check for paper jams. 2. Ensure the printer has enough ink. 3. Make sure the printer door is closed. 4. Ensure the printer has paper. 5. Verify the printer is powered on. 6. Check the printer cable connection.
What to do if Stryker Medical Equipment SDC3 does not recognize the iPad?
If the Stryker SDC3 does not recognize the iPad, unplug the iPad from the USB drive, then plug it back in. Wait at least 30 seconds for the iPad to connect.
How to fix FTP connection error on Stryker SDC3 Medical Equipment?
If you encounter an FTP connection error with Stryker Medical Equipment, ensure the FTP server is active and the network cable is properly connected.
What to do if I get error media unavailable on Stryker SDC3 Medical Equipment?
If you get the 'Error: Media unavailable' message on Stryker Medical Equipment, please insert or connect a valid media to the SDC3.
What to do for error disk corrupt on Stryker SDC3?
If you encounter the message 'Error: Disk corrupt. Please try again...' on Stryker Medical Equipment, it means the media is corrupt. Insert a new disc to continue.
How to fix error disc drive busy on Stryker Medical Equipment?
If you receive the error 'Error: Disc drive busy' on Stryker Medical Equipment, ensure the disc drive is not currently in use. If the error persists, reboot the machine.
Why I am getting error saving more than 4GB files to the USB on Stryker Medical Equipment?
If you're having trouble saving more than 4GB files to the USB on Stryker Medical Equipment, ensure that the USB is formatted as NTFS, because FAT32 does not support file sizes larger than 4GB.
What to do if application has encountered a critical error and is shutting down on Stryker SDC3?
To resolve the 'Application has encountered a critical error and is shutting down' message on Stryker Medical Equipment, please reboot the system.
Important warnings and cautions for safe operation and device protection.
Capturing still images and recording video from a single camera source.
Recording and viewing video from two sources simultaneously (PIP, Synchronized, Independent).
Configuring FTP, network adapters, Wi-Fi, streaming, and share settings.
Configuring Studio3, DICOM, Stryker Link, Cloud, PowerShare, and EMR integration.
General| Display | LCD |
|---|---|
| Screen Size | 15" |
| Resolution | 1024 x 768 (XGA) |
| Connectivity | Ethernet |
| Supported File Formats | JPEG, BMP |
| Category | Medical Equipment |
| Video Output | DVI |
| Touchscreen | No |
To Next Page
