To Next Page
B
Barry BrownAug 25, 2025
How to fix no live video on preview on Stryker SDC3 Medical Equipment?
- JJulie RayAug 25, 2025
Ensure the camera is on, check cable connections, and verify the correct video source is selected.
How to fix no live video on preview on Stryker SDC3 Medical Equipment?
Ensure the camera is on, check cable connections, and verify the correct video source is selected.
How to resolve error locating logo.bmp on Stryker SDC3?
To fix the 'Error locating logo.bmp' on Stryker Medical Equipment, ensure the USB cable is properly connected and that the logo file is present on the USB drive and named “logo.bmp.”
How to fix device status overlays that do not appear on the surgical display on Stryker Medical Equipment?
To resolve the issue of device status overlays not appearing on the surgical display of your Stryker Medical Equipment, ensure proper connections between devices and device ports on the SDC3. Also, make sure the device is selected/added in the “Video Settings: On-Screen Display” menu.
How to resolve error upgrading software on Stryker SDC3 Medical Equipment?
To resolve the 'Error upgrading software' message on Stryker Medical Equipment, insert the upgrade dongle in the save screen.
How to fix no videos written to the USB on Stryker Medical Equipment?
To address the issue where no videos are written to the USB on Stryker Medical Equipment, ensure that “write videos to USB” is selected in the save settings.
How to fix no videos written to the network on Stryker Medical Equipment?
To resolve the issue of no videos being written to the network on Stryker Medical Equipment, ensure that “write videos to Network” is selected in the save settings.
What to do if USB space is insufficient on Stryker SDC3?
To address insufficient USB space on Stryker Medical Equipment, ensure there is free space available on the media.
What to do if video limit reached on Stryker SDC3?
If you've reached the video limit on Stryker Medical Equipment, begin a new case to capture more videos.
What to do if image limit reached on Stryker SDC3?
If you've reached the image limit on Stryker Medical Equipment, begin a new case to capture more images.
What to do if error printing because no image captured or selected on Stryker Medical Equipment?
If you encounter an error printing on Stryker Medical Equipment because no image was captured or selected, capture images first, and then select them to print.
General| Display | LCD |
|---|---|
| Screen Size | 15" |
| Resolution | 1024 x 768 (XGA) |
| Connectivity | Ethernet |
| Supported File Formats | JPEG, BMP |
| Category | Medical Equipment |
| Video Output | DVI |
| Touchscreen | No |
Important warnings and cautions for safe operation and device protection.
Capturing still images and recording video from a single camera source.
Recording and viewing video from two sources simultaneously (PIP, Synchronized, Independent).
Configuring FTP, network adapters, Wi-Fi, streaming, and share settings.
Configuring Studio3, DICOM, Stryker Link, Cloud, PowerShare, and EMR integration.
