Stryker S3 - Connecting Peripheral Equipment to the Built-In 110 Volt Auxiliary Power Outlet (Option)

www.stryker.com 3006-209-001 REV B 33
Operation
Connecting peripheral equipment to the built-in 110 volt auxiliary power outlet
(option)
WARNING
• Only use hospital-grade electric equipment consuming 10A or less with the auxiliary power outlet (option). The use
of standard electric equipment may bring the current leakage to a level unacceptable for hospital equipment.
• Do not use the 110V auxiliary power outlet (option) for life sustaining equipment.
The 110 volt auxiliary power outlet is a built-in outlet for peripheral equipment. You can find the outlet under the foot end
on the patient right side of the product (Product illustration on page 14).
Figure 23: Optional auxiliary outlet