Stryker VisionElect 240-030-930 User Manual

29 pages

To Next Page

Test Report No.: GETEC-E3-06-043

FCC Class B Certification

EUT Type: 21” FLAT PANEL MONITOR

APPENDIX G

: USER’S MANUAL

FCC ID: QVXAMM213TDS3

Questions and Answers:

C
chanjuanAug 2, 2025
How to fix no picture on my Stryker Monitor?
- D
  David BautistaAug 2, 2025
  If the LED on your Stryker Monitor is ON but there's no picture, use the OSD to adjust the brightness and contrast to the maximum, or reset them to their default settings. If the LED is OFF, ensure the power switch is on and the AC power cord is properly connected to the AC adapter. If the LED is blinking, check that the video signal cable is properly connected at the back of the monitor and that the computer system is powered on.
Y
Yvette RodriguezAug 17, 2025
What to do if my Stryker VisionElect 240-030-930 Monitor displays an abnormal picture?
- R
  Rachel LeonAug 17, 2025
  If you observe an abnormal picture on your Stryker Monitor, use the Auto Setup button to adjust CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION, especially when using non-standard signals. After adjusting the image size, wait a few seconds before changing, disconnecting the signal, or powering off the monitor.

Stryker VisionElect 240-030-930 Specifications

General

Aspect Ratio	16:9
Brightness	250 cd/m²
Contrast Ratio	1000:1
Response Time	5 ms
Display Size	24 inch
Resolution	1920 x 1080
Video Inputs	DVI, VGA
Model	VisionElect 240-030-930

Summary

Appendix G: User's Manual

Warnings and Cautions

Safety Warning Definitions

Explains warning symbols and defines terms like Warning, Caution, and Note.

User Safety Warnings

Lists crucial safety instructions users must follow to avoid injury or damage.

Cautions and Precautions

Operational and Environmental Precautions

Details precautions for power, grounding, ventilation, placement, and handling.

Product Information

Product Contents and Description

Lists product contents and describes the monitor's intended use and features.

Setup and Configuration

System Interconnection

Diagram and explanation of how to connect video sources and peripherals.

Power Connection

Details the procedure for connecting the monitor to a power source.

Monitor Operation

Front Panel Controls

Describes the function of the monitor's physical controls and indicators.

On-Screen Display (OSD) Navigation

Guides users on navigating and interacting with the monitor's OSD menus.

OSD Function Details

Specialty, General, and Image Settings

Covers color temperature, RGB, brightness, contrast, sharpness, and image effects.

Advanced Controls and Information

Details advanced OSD options, key lock, and system information fields.

Cleaning and Maintenance

Cleaning Precautions

Advises against moisture and direct liquid application to the screen.

Cleaning Procedure and Agents

Outlines the steps for cleaning the monitor and lists acceptable cleaning agents.

Troubleshooting

No Picture Issues

Provides remedies for scenarios where the monitor displays no picture.

Abnormal Picture Issues

Offers solutions for distorted or incorrect image display problems.

Technical Specifications

Display and Electrical Specifications

Details display panel characteristics, resolution, response time, and power specs.

Physical Dimensions and Environmental Conditions

Lists physical dimensions, weight, mounting interface, and operating/storage conditions.

Classification and Approvals

Medical Equipment Compliance

Details compliance with UL 60601-1 and CAN/CSA C22.2 No. 601.1 standards.

Safety and Disposal Warnings

Warns about use with flammable anesthetics and cautions on waste disposal.

Electromagnetic Compatibility (EMC)

EMC Precautions and Compliance Standards

Advises on EMC precautions and states compliance with IEC 60601-1-2 requirements.

Potential Interference and Mitigation

Warns about potential interference from RF equipment and suggests mitigation.

Electromagnetic Emissions Declaration

RF Emissions Guidance and Compliance

Provides guidance on RF emissions, compliance, and their effect on nearby equipment.

Harmonic and Voltage Fluctuation Compliance

Details compliance with harmonic emissions and voltage fluctuation standards.

Electromagnetic Immunity Declaration

Immunity to ESD, Transients, and Surges

Specifies immunity levels for ESD, fast transients, bursts, and surges.

Immunity to Voltage Variations and Magnetic Fields

Details immunity for voltage variations on power lines and power frequency magnetic fields.

RF Immunity and Separation Distances

Conducted and Radiated RF Immunity

Specifies immunity levels for conducted and radiated RF interference.

RF Separation Distance Calculations

Provides equations and guidance for calculating RF separation distances.

Recommended Separation Distances

Separation Distance vs. Transmitter Power

Table detailing minimum separation distances based on transmitter power and frequency.

Warranty Information

Product Warranty Coverage

States the warranty period and coverage for defects in material and workmanship.

Return and Repair Procedures

Outlines the procedure for returning the product for repair or replacement.

Service and Claims

Contacting Service and Support

Provides contact information for obtaining service and making claims.

Declaration of Conformity

Manufacturer and Product Compliance

Details manufacturer, product, and compliance testing standards.

European Representative Details

Identifies the European authorized representative and their contact details.

Related product manuals

Stryker VisionPro

26 pages

Stryker 0240-031-000