Strymon MultiSwitch Plus User Manual

MultiSwitch Plus - Extended Control
pg 13
A quick reference for the connected pedal setup. For more details see pedal user manual.
Tap, FAV, Boost & Speed Mode Pedal Setup
Power up holding BOTH footswitches.
While holding footswitches, turn the
SATURATION knob to the 12 o’clock position.
Set both toggles to DOWN position.
Power up holding BOTH footswitches.
2
2
1
1
Brigadier, DIG, El Capistan, Flint
Setting EXP jack to Tap Tempo Mode.
Deco
Setting EXP jack to Tap Tempo mode.
Press and release the VALUE knob again,
then turn the VALUE knob to select the TAP
expression mode: TAP.
Turn the VALUE knob until the display reads
EXP MD (expression mode).
Press and hold the VALUE knob on your
TimeLine, BigSky or Mobius for at least
2 seconds to access the GLOBALS menu.
Release the VALUE knob.
3
2
1
BigSky, Mobius, TimeLine
Setting EXP jack to Tap Tempo mode.
Turn ECHO LEVEL knob to the left until TAP LED
lights up AMBER.
Press and hold TAP footswitch at power up.
2
1
Volante
Setting EXP jack to Tap Tempo mode.
Press TAP footswitch to exit.
3
Turn DRIVE knob all the way to the right.
The FAVORITE LED will light up PURPLE.
Press and hold FAVORITE footswitch at
power up.
2
1
Riverside
Setting BOOST jack to Boost mode.
Press the ON or FAVORITE footswitch once again
to store this setting and begin using Riverside.
3
NOTE: On BigSky, tap tempo sets the Pre-Delay
time.

Strymon MultiSwitch Plus Specifications

General

Brand	Strymon
Model	MultiSwitch Plus
Category	Control Unit
Language	English