Strymon MultiSwitch Plus User Manual

MultiSwitch Plus - Extended Control
pg 15
Compatibility Chart
Here is the list of MultiSwitch Plus compatibility. For the latest list of compatible product visit
strymon.net/multiswitchplus.
*NOTE: To check firmware on TimLine BigSky and Mobius, press and hold far right footswitch on
power up. Turn the TYPE knob until the display shows REVISN and then push the TYPE knob again.
Mode
Preset Mode
Custom Mode
TimeLine, BigSky,
and Mobius Mode
Tap/Fav/Boost/
Speed Mode
Combo Mode
Adds the ability to select and bypass
onboard presets 1, 2, and 3.
Provides remote access to Volante’s Speed
switch, and enhances transport controls.
Expanded preset selection control.
Dedicated looper controls (TimeLine).
Each footswitch is paired with the closest
output and its function can be independently
assigned.
Footswitches A and B will select between
presets 1 and 2 for pedals connected to
outputs 1 and 2. Footswitch C can be used
for remote Tap Tempo, Favorite, Boost, or
Speed for the pedal connected to output 3.
Sunset, Riverside, Volante
Volante
TimeLine v1.87, BigSky v1.49,
Mobius v1.39*
Tap:BigSky, Deco, DIG, Flint,
Mobius, TimeLine, Volante
Fav:Brigadier, Deco, DIG, El
Capistan, Flint, Lex, Riverside,
Sunset
Boost:Riverside
Speed:Lex
Presets:Sunset, Riverside,
Volante
Tap:BigSky, Deco, DIG, Flint,
Mobius, TimeLine, Volante
Fav:Brigadier, Deco, DIG, El
Capistan, Flint, Lex, Riverside,
Sunset
Boost:Riverside
Speed:Lex
Description Compatibility

Strymon MultiSwitch Plus Specifications

General

Brand	Strymon
Model	MultiSwitch Plus
Category	Control Unit
Language	English