Strymon MultiSwitch Plus User Manual

MultiSwitch Plus - Extended Control
pg 7
This mode allows you to connect up to three supported pedals
1
for independent,
dedicated footswitch functions.
Tap, Favorite, Boost & Speed Mode
Release the footswitch. The LEDs on MultiSwitch
Plus will all be lit. Press the footswitches to
assign each switch and jack pair to control Tap
(GREEN LED) or FAV/Boost/Speed (RED LED).
Enter Tap, Favorite, Boost & Speed Mode by
holding down the B footswitch while connecting
the TRS cable to MultiSwitch Plus. The B LED
will flash RED to confirm the selection and all
LEDs will illuminate.
Connect the included TRS cable to the EXP or
FAV jack of the pedal you wish to control.
Press and hold the B footswitch to exit
configuration mode.
3
2
1
4
Tap, Boost,
Fav or Speed
Footswitch A
Output Signal
Footswitch B
Output Signal
Footswitch C
Output Signal
Check the Appendix for instructions on
how to configure the connected pedal for
use in this mode.
5
1
Check the Compatibility Chart on pg.15 for
details and a list of compatible pedals.
A
B
C
+
EXP

Strymon MultiSwitch Plus Specifications

General

Brand	Strymon
Model	MultiSwitch Plus
Category	Control Unit
Language	English