Strymon Riverside - Controls and Connections: Controls; 3-Band EQ

REAR PANEL FUNCTIONS
IN
Mono instrument input.
PRESENCE
Tailors the top end character of the output to match
your amp. Try minus (-) or center in front of an amp.
Try plus (+) when plugging straight into a power amp.
OUT
Mono signal out.
BOOST
Boost Switch Mode - Use an external switch to toggle up to
+6dB of post-boost on/o (default configuration).
Boost input can be used in several ways. See user manual for
additional configurations.
EXP
Volume Pedal Mode – Use a
standard TRS expression pedal to
control of the output volume of the
eect (default configuration).
Expression input can be used in
several ways. See user manual for
additional configurations.
POWER
Use an adapter with the following
rating: 9VDC center negative.
250mA minimum.
Download the full Riverside manual at strymon.net/support/riverside